Avon Protection C50™ Air Purifying Respirator

PRODUCT DESCRIPTION

The Avon Protection C50™ protective mask offers high protection, outstanding field of vision, and superior comfort. The innovative design features optimize the user’s time in the operational area. Ideal for battlefield CBRN protection, first responders, correctional officers, specialist law enforcement & counter terrorism operations.

The C50 shares key technologies with the U.S. M50/JSGPM (Joint Services General Purpose Mask) to provide maximum operational flexibility. It is capable of countering multiple threat scenarios, including chemical, biological, nuclear and radiological (CBRN) agents, toxic industrial chemicals (TICs), and toxic industrial materials (TIMs).

The U.S. Government has certain controls over the C50™ Air Purifying Respirator and prohibits the exporting, selling, transferring, transporting, or shipping of the product outside the U.S. This restriction applies whether the product is in its original form or has been incorporated into other items without first obtaining approval from the U.S. government, or as authorized by U.S. law and regulations. This product is subject to Export Administration Regulations (EAR) with a classification of 1A004.

Product shipped in fulfillment of e-commerce orders may be more than one year old. ALL SALES ARE FINAL. OPEN BOX RETURNS WILL NOT BE ACCEPTED.

Suitable For:

• Military
• First Responders
• Prisons and Corrections

Warnings and Limitations of Use

• Always perform a satisfactory negative pressure leak test before using this respirator.
• Do not use in confined spaces such as stills, tanks or sewers. This device does not provide supplied breathable air.
• It is unlikely that the requirements for inward leakage of the system will be met if facial hair, or spectacle side arms pass under the face seal of the full face mask.
• Do not use this equipment in Oxygen deficient atmospheres (<19.5% Oxygen) or for airborne contaminants or pollutants for which the approved filter canister(s) will not provide adequate protection.
• Do not use this equipment in Oxygen enriched atmospheres (> 22.5% Oxygen).
• System set-up, pre-check, donning, doffing, cleaning and maintenance must be performed in an area known to be free of contaminants.
• Do not use if any system component demonstrates signs of wear or damage.
• Do not use in areas where the head harness may be exposed directly to flame.

Potential misuse of the equipment may result in serious, irreversible respiratory harm or death. These actions include:

• Firefighting
• Modifying, removing or re-configuring any of the system components other than as recommended by the manufacturer.
• Adapting the system to accommodate attachments or apparatus not approved for use by the manufacturer.
• Re-using the equipment without appropriate decontamination or following impact or tear damage without inspection and testing, even though contamination or damage may not be apparent.
• Use with unapproved filter canisters.

FEATURES

• Field of View
  • Panoramic single lens visor
  • Optically correct visor
  • Scratch resistant
• Comfort
  • 3 face piece sizes for improved fit
  • Chlorobutyl rubber and silicone blend mask
  • Reflex seal with low profile brow for helmet compatibility
• Communications
  • Front mounted exhale valve allows clear direct communication
  • For enhanced communication an optional VPU is available
  • External communications systems can be attached to mask
• Air Management
  • Low inhalation resistance & excellent de-mist properties
  • Heat build-up minimized
  • Low-re-breathed carbon dioxide

SPECIFICATIONS

SIZING

Please select the correct size according to the sizing chart guide found in the photo gallery for this product.

Note: For proper mask fit, faces must be clean shaven.

Facial hair, sideburns, bangs and headwear may prevent a protective facepiece from forming and/or maintaining a tight-fitting seal on someone’s face. It is recommended the user be clean shaven and/or hair pulled back for sizing and using the respirator to ensure an appropriate seal.

To ensure you have selected the correct size you should perform a negative pressure test. The negative pressure test can be performed by putting the mask on your face, breathe out, then block the inhalation valve and take a deep breath. For the FM50 you will need to block both inhalation valves before taking a breath. The mask should collapse to the face. If you experience a tight seal to your face then the mask has the right fit.

If you are still unsure of your size or are certain you are going to be in a hazardous environment and need to ensure the most accurate sizing you may purchase a Sizing Tool.

*Except in the rare case of defective product. Please contact customer service for further instruction in this instance.

TECHNICAL DATA

RESOURCES

• Product Brochure